Cascade’s CDO-5 is purpose-built for bench-top, R&D drying and decarboxylation of material with additional features: Built-in Humidity Sensor assists in monitoring dryness, Adjustable stainless steel shelves – 2 each, NRTL Certification, 2 each FDA temp rated fine micron mesh bags for ground material – Mesh bags are required to prevent oven contamination and ground material loss.
This powerful benchtop forced air laboratory oven uses heated air to remove unwanted compounds from products that are not temperature sensitive. Our ovens feature horizontal airflow that enables more consistent distribution of air. They are designed to have uniform temperatures and airflow across the shelf space from right to left.
The CDO-5 includes a built-in humidity sensor and fine micron mesh bags for drying or decarboxylating powders or ground material.
+2°C (36°F) above room temp to 180°C (350°F)
4.9 cu ft
110V or 220V option
All shelves are removable and adjustable.
Volume: 4.9 Cubic Ft. / 138 Cubic Liters
Interior (W x D x H):
21” x 19.44” x 20.75”
534mm x 494mm x 527mm
Exterior (W x D x H):
34.1” x 28.1” x 38.75”
866mm x 711mm x 984mm
Temperature Range: +2°C (36°F) above room temp to 180°C (350°F)
Temp Stability: +/-0.4 °F
Temp Uniformity @ 40°C (100°F): +/- .5°C (1°F)
Temp Uniformity @ 115°C (240°F): +/- 1°C (1.5°F)
Temp Uniformity @ 150°C (305°F): +/- 2°C (3°F)
Heat up / Stabilization Time from 25°C (77°F) to 115°C (240°F): 40 min
Airflow Exchanges: 220 per hour @ 80°C (176°F)
Linear Shelf Space Airflow: 145 Feet Per Min (44 Liters Per Min)
Air Intake:Adjustable side vents.
Air Exhaust: Adjustable. Top 2.75: Dia
Exhaust Airflow @ 80°C (176°F): 18.5 Feet Per Min (523.9 Liters Per Min)
Comes with 2 each. Height Adjustable.
Fits 5 max – buy more here
Surface Area (W x D): 20.75″ x 19″
Weight Capacity: 50lbs
Comes with 2 Temp Rated Mesh Bags
Fits 4 max – buy more here
Melt Temperature: 161°C (363°F)
Softening Point: 152°C (305°F)
Heat Deflection Temperature: 90°C (194°F)
Glass Transition Temperature: 0°C (32°F)
* Mesh bags are REQUIRED to prevent oven contamination and ground material loss.
* Polypropylene products produced for some filtration applications are made from resin that complies with FDA regulations for food contact. The regulation compliance is product number dependent / specific.
* Impact at cold temperatures is likely to cause strand cracking or breakage
NRTL TUV #U8 170464972 077
CAN/CSA-C22.2 No. 61010-1:2012
+ UPD No. 1:2015-07 + UPD No. 2:2016-04
CAN/CSA-C22.2 No. 61010-2-010:2015